Have 1983 quarters always fascinated you? Are you considering collecting these coins? If so, we wrote this article for you. In it, we are going to discuss the 1983 quarter value, its history, key features, varieties, and errors.

1983 Quarter Details

1983 Quarter Details

• Category: Washington Quarters
• Total Mintage: 1,294,620,570
• Minting place: Philadelphia, Denver, San Francisco
• Weight: 5.67 g
• Diameter: 24.3 mm
• Edge: Reeded
• Face value: 25 cents ($0.25)
• Composition: 8.33% nickel and 91.67% copper
• Engraver: John Flanagan

The 1983 Quarter’s Obverse Design

This coin’s obverse features an image of George Washington facing left. Under his chin, the words, “IN GOD WE TRUST” are written. Above his head, along the coin’s top rim, the word “LIBERTY” is written.

This inscription starts from the left of Washington’s forehead to the back of his head. Along the coin’s bottom rim, just below where Washington’s neck cuts off, the date 1983 is engraved. This entire design was the work of a sculptor called John Flanagan.

The 1983 Quarter’s Reverse Design

The most noticeable feature of the 1983 quarter’s reverse side is the image of an eagle with outstretched wings; this is at the design’s center. This eagle is standing on a bundle of arrows that are arranged with sharp tips on the right.

Below this bundle is a wreath made of olive branches. This wreath extends to the sides of the perch. Also, it’s just above a legend with the writing “QUARTER DOLLAR” along the bottom rim of the coin.

There’s also a legend along the top rim of the coin that says “UNITED STATES OF AMERICA”.

This starts on the side of the eagle’s left wing and ends on the side of its right wing. Beneath this legend and just over the eagle’s head, the coin has the words “E PLURIBUS UNUM”.

The 1983 Quarter’s Other Features

The 1983 quarter has a reeded edge and a diameter of 24.3 mm. More importantly, it has a composition of 91.67% copper and 8.33% nickel.

This was achieved by applying a layer of 75% copper and 25% nickel over a pure copper center. This gives the resulting coin a mass of 5.67 grams.

1983 Quarter Value Chart

1983 Quarter Value and Varieties Guide

1983 P Quarter

• Type: Washington Quarters
• Mint Mark: P
• Minting place: Philadelphia
• Year: 1983
• Edge: Reeded
• Mintage: 673,535,000
• Designer: John Flanagan
• Face value: 25 cents ($0.25)
• Current value: $0.25 to $600
• %Composition: 8.33% nickel and 91.67% copper
• Mass: 5.67 g
• Diameter: 24.3 mm

In 1983, the Philadelphia mint produced 673,535,000 quarters. Each of these had a “P” mint mark on the obverse side, behind Washington’s neck, just after the ribbon in his hair. This is one of the first coin types to bear the Philadelphia mint mark.

Since this mint facility was the only one in the country for years, it didn’t originally see the point of using a mint mark. However, with the opening of the Denver and San Francisco facilities, the Philadelphia one decided to start using a mint mark.

It first used a “P” mint mark in the nickels minted from 1942 to 1945. However, it never did this again until it produced the 1979 dollars with this mark. And from 1980, they decided to put a mint mark on all their coins going forward except cents.

So this mark didn’t even make the 1983 quarters special or scarce. Many of them are still available today because of their high mintage. As such, you can get a low-grade version for as little as 25 cents.

However, an MS67 can go for around $600. Some even go for above $2,500.

1983 D Quarter

• Type: Washington Quarters
• Mint Mark: D
• Minting place: Denver
• Year: 1983
• Edge: Reeded
• Mintage: 617,806,446
• Designer: John Flanagan
• Face value: 25 cents ($0.25)
• Current value: $0.25 to $1,300
• %Composition: 8.33% nickel and 91.67% copper
• Mass: 5.67 g
• Diameter: 24.3 mm

In 1983, the Denver mint produced 617,806,446 quarters. Each one of these had a “D” mint mark on the obverse side behind Washington’s head. Since these coins have a high mintage, they are still readily available today.

The low-grade ones are available at as little as 25 cents per piece. But the high-grade ones are rarer and more expensive. An MS67 can go for as high as $1,300.

1983 S Quarter

• Type: Washington Quarters
• Mint Mark: S
• Minting place: San Francisco
• Year: 1983
• Edge: Reeded
• Mintage: 3,279,126
• Designer: John Flanagan
• Face value: 25 cents ($0.25)
• Current value: $5 to $80
• %Composition: 8.33% nickel and 91.67% copper
• Mass: 5.67 g
• Diameter: 24.3 mm

In 1983, the San Francisco mint produced 3,279,126 quarters. All of these were proof coins and they had an “S” mint mark. The mint mark is located behind the neck of the Washington image.

These coins have been bought by several collectors over the years and have the designation of deep cameo. This is the highest designation a proof coin can get. Despite this, these coins are readily available today at affordable prices.

This is because of their high mintage. You can get a PR64 one for a mere $5. You can get a PR70 one at $37 to $80.

1983 Quarter History

The 1983 quarter belongs to a series of coins known as Washington quarters. The first coin of this series was minted in 1932 and was supposed to be used for that year alone. However, Washington quarters are still minted today.

They were originally launched to commemorate 200 years after Washington’s birth. But this wasn’t the original plan for the 1932 quarter. The half dollar of that year was the one meant to bear Washington’s image. This is what the Bicentennial committee wanted.

However, Congress chose to replace the Standing Liberty quarter instead and place an image of Washington on its obverse. To bring the new design to life, the Bicentennial committee decided to hire a sculptor called Laura Fraser.

She was chosen because of a medal she had previously designed that bore Washington’s image. However, she never got to make the 1932 quarter designs; the treasury secretary eventually chose a design by John Flanagan.

This design was minted on planchets with a composition of 90% silver and 10% copper. Ultimately, the mint maintained this composition until the year 1964.

But because of the increase in silver prices that year, the mint decided to reduce the silver content in its coins. This led them to start creating Washington coins with a copper core and a top layer of copper and nickel in 1965.

This method created coins with 8.33% nickel and 91.67% copper. This is still the composition used for quarters today. As a result, these coins are lighter; they weigh 5.67 g while the ones from previous years weighed 6.25g.

Keep in mind though; the mint still produces proof silver coins that it sells in sets. Composition aside, the design of the Washington quarter has also changed severally over the years.

For instance, the 1975 and 1976 quarters feature a reverse design with a drummer. Other reverse designs were also produced from 2010 to 2020. These featured US sites and gave the resulting coins the name America the Beautiful Quarters.

In 2021, these coins were replaced by coins with a reverse design featuring Washington. The mint has even laid plans to further produce new designs every year until the year 2030.

However, the quarter’s obverse design will still feature Washington even beyond 2030.

1983 Quarter Grading

Grading 1983 quarters or any other Washington quarters will require you to have some training or money to pay a professional agency. Keep in mind though; professional agencies will not accept coins contaminated with chemicals like polyvinyl chloride (PVC).

List of 1983 Quarter Errors

1. 1983 Quarter Finned Rim

A finned rim is an error that happens when excessive striking pressure is used on one side of the coin or its entirety. It usually looks like a flange around the rim of the coin. This is created because excess metal escapes to the gap between the collar and the die neck.

Such flanges can either occur on one side of a coin or both. Either way, this error adds value to a coin.

2. 1983 Quarter Reverse Indent

A full indent error occurs when one planchet is struck on top of the other, resulting in a coin made of two coins stuck together. They can be stuck together on either the reverse or obverse side.

If it’s the reverse side that’s stuck, the error is known as a reverse indent error. This error is very valuable in coins, especially when it’s combined with other errors.

For instance, an MS63 1983 P quarter with a finned rim and a reverse indent sold for over $310 at Heritage Auctions.

3. 1983 Quarter Overstruck on an Amusement Token

This is a unique error present in only one 1983 quarter. This coin was struck on an amusement token instead of a blank. It is the only coin to have ever been struck on an amusement token to date.

The most similar error seen is one where a few half cents were struck on TAL tokens. Some people even speculate that someone at the mint made this coin on purpose. One of the most interesting things about this coin is that you can still see the details of the token.

These include the words “THIS IS MY LUCKY DAY” written diagonally across the obverse. Ultimately, this NGC MS65 P quarter sold for almost $16,000 at a January 2014 auction.

4. 1983 Quarter Spitting Eagle

1983 quarters with this error have a vertical line on their reverse side starting from the eagle’s beak to its feathers. This line usually forms when two dies clash without any planchet between them.

This error is only present in 1983 quarters minted in Philadelphia. Also, several grading agencies have recognized the 1983 P spitting eagle as a variety of the 1983 quarter. As such, it’s more expensive than ordinary 1983 quarters. It can cost you up to $500.

5. 1983 Quarter Struck on a Nickel

This is an error that occurs when the mint strikes a 1983 quarter design on a blank made for a nickel. Any coin that results from this will be smaller and lighter than it should be. Some coin design elements may not even be able to fit on it.

But it will be more expensive than an ordinary quarter. For instance, an NGC AU58 1983 P quarter that was struck on a nickel ended up weighing 5 grams and sold for over $180.

6. 1983 Quarter Struck Off Center

When a coin is struck off-center, the design ends up towards one side of the coin and the whole of it doesn’t fit. Generally, the more off-center the design is, the more valuable the coin.

A 1983 P quarter that is struck 70% off center can go for over $150.

1983 Quarter FAQ

Is there a rare 1983 quarter?

Most 1983 quarters aren’t rare or excessively valuable. Most of them will cost you from $0.25 to $100. And the type of mint mark your coin has isn’t a great indicator of value either.

If your focus is value, you’re better off looking for mint-state coins that have an error. These are hard to find but can sell for thousands of dollars. If you think you’ve found one, ensure you get a professional agency to grade it for you.

The 1946 nickel value is not just a piece of currency; it’s a window into the history of post-World War II America. While its face value is only five cents, collectors and hobbyists alike might wonder if this little piece of the past could be worth significantly more. Whether you’re a seasoned numismatist or simply curious about old coins you’ve stumbled upon, understanding the 1946 nickel’s value can be fascinating — and potentially lucrative.

This blog will walk you through everything you need to know about the 1946 nickel, from its historical context to the factors that determine its worth. By the end of this guide, you’ll know how to assess your coin’s value and whether it’s worth holding onto or cashing in.

A Brief History of the 1946 nickel value

The 1946 nickel value came into circulation during a time of swift change. The United States had just emerged from World War II, and the country was shifting from a wartime economy to peacetime prosperity. Coin production resumed using its usual materials after the U.S. Mint had altered nickel compositions during the war to conserve metals like nickel and copper for military use.

From 1942 to 1945, nickels were minted with a mix of 35% silver, 56% copper, and 9% manganese, creating what’s now known as “wartime nickels.” These coins stood out because they included a large mint mark over the Monticello dome. But in 1946, the Jefferson nickel returned to its original composition of 75% copper and 25% nickel.

The 1946 Jefferson nickel, though seemingly unremarkable at first glance, holds historical significance as a bridge between the wartime and post-war years.

How to Identify a 1946 Nickel

Before examining a 1946 nickel for value, it’s important to confirm its authenticity. Here’s how to identify one accurately:

• Obverse (front): The coin features a profile portrait of President Thomas Jefferson. This design has been a staple of the Jefferson nickel series since 1938.
• Reverse (back): On the reverse, you’ll find the Monticello, Jefferson’s Virginia estate, accompanied by the words “Monticello” and “Five Cents.”
• Mint Year: Look for “1946” on the obverse side, directly under Jefferson’s portrait.
• Mint Mark: The 1946 nickels were minted in three locations—Philadelphia (no mint mark), Denver (marked “D”), and San Francisco (marked “S”). The mint mark is found on the reverse of coins from Denver and San Francisco, to the right of Monticello.

Differentiating Between Regular and Wartime Nickels

Keep in mind that a 1946 Jefferson nickel does not contain silver, unlike its wartime predecessors. To distinguish between wartime and post-war nickels at a glance, check if the coin has a large mint mark above the Monticello dome—this is a characteristic unique to wartime nickels minted between 1942 and 1945.

Factors That Determine a 1946 Nickel’s Value

The value of a 1946 nickel depends on several factors, including rarity, condition, and demand among collectors. While most are worth only their face value or slightly more, certain coins with unique traits can fetch a higher price. Below are the key factors to consider:

1. Mint Mark and Rarity

Nickels with mint marks from Denver (“D”) and San Francisco (“S”) are generally more desirable than those minted in Philadelphia, as they were produced in smaller quantities. For example:

• 1946 (No Mint Mark – Philadelphia): Mintage of over 161 million.
• 1946-D (Denver): Mintage of over 45 million.
• 1946-S (San Francisco): Mintage of just over 13 million, making it the rarest of the three and thus often higher in value.

2. Condition

Condition or “grade” is arguably the most important factor. Coins are graded on a scale of 1 to 70, with higher scores indicating better condition. Here’s a general breakdown:

• Good (G-4): Heavy wear with major design details barely visible. Typically worth just face value.
• Fine (F-12): Moderate wear, but the main design elements are clear.
• Extremely Fine (EF-40): Light wear, with sharp details. These coins may fetch $.50 to $1.
• Uncirculated (MS-60+): No wear and mint-fresh appearance. Uncirculated coins with high grades can range from $5 to $25 depending on the mint mark.

3. Errors and Variations

Coins with minting errors or unusual characteristics are highly prized by collectors:

• Double Die Errors: Some 1946 nickels exhibit double or overlapping images, particularly in the letters or numbers.
• Off-Center Strikes: These occur when the coin design is not properly aligned with the blank, creating a unique and desirable misprint.
• Re-punched Mint Marks: Look closely at the mint mark for signs of doubling or over-punching, which can significantly increase the coin’s value.

4. Historical and Sentimental Value

While not a monetary value, the historical significance of a 1946 nickel can make it a treasured keepsake for those interested in World War II-era memorabilia.

How Much Is a 1946 Nickel Worth?

Here’s a quick overview of what you can expect in terms of value based on condition and rarity:

• Commonly Circulated Coins: Usually worth their face value (5 cents) to $.25.
• Extremely Fine Condition Coins: Fetch between $.50 and $1.
• Uncirculated (Mint State) Coins: These may sell for $5 to $25 depending on their grade and mint mark, with 1946-S coins often commanding the highest prices.
• Error Coins: Depending on the type and visibility of the error, these can range from $50 to several hundred dollars.

Collecting and selling coins can be subjective, so it’s always worth consulting a professional coin appraiser or referencing the latest auction prices for more precise values.

Where to Buy or Sell 1946 Nickels

If you’re looking to add a 1946 nickel to your collection—or part ways with one—there are several channels to explore:

• Local Coin Shops: Many dealers buy and sell vintage coins and can provide on-the-spot valuations.
• Online Marketplaces: Websites like eBay, Etsy, or Heritage Auctions make it easy to connect with buyers or sellers.
• Coin Shows and Collecting Communities: Attend coin shows or join online groups to network with fellow enthusiasts.
• Professional Grading Services: If you own a high-grade or error coin, consider having it graded by a service like PCGS or NGC to maximize its resale value.

Tips to Maximize the Value of Your 1946 Nickel

If you’ve got a 1946 nickel and you’re hoping to maximize its value, here’s what you should do:

1. Handle With Care: Always hold coins by the edges and avoid excessive handling to preserve their condition.
2. Store Properly: Use coin holders, flips, or albums to protect your nickels from scratches, moisture, and tarnishing.
3. Educate Yourself: Research current market trends and recent auction results to stay informed about demand.
4. Verify Authenticity: Get error coins or high-grade nickels professionally assessed to certify their worth.

Unlock the Hidden Value of Your Coins

While the 1946 nickel value may not make you an instant millionaire, it can be a gateway into the rewarding hobby of coin collecting. Whether you’re drawn to its historical significance or intrigued by the thrill of discovering a rare gem, this unassuming coin bridges the past and present in the palm of your hand.

If you’re eager to learn more about valuing coins or starting your collection, stay tuned for more tips and resources on identifying opportunities in your pocket change!

Introduction

ADn-237 is a term that has gained significant attention in various fields but leaves many unclear about its specific applications and importance. This guide is designed to demystify ADn-237, offering an authoritative overview of what it is, how it is used, and its broader implications in practical scenarios.

Whether you’re a researcher, industry professional, or simply someone looking to enhance your knowledge, this blog will provide all the factual details and key insights you need to understand comprehensively. Let’s get started.

What Is ADn-237?

ADn-237 refers to [expand on what it is based on its domain—for example, a compound, tool, code, or technology within a certain field]. It plays a pivotal role in [specific application], offering distinct advantages in terms of [key benefits].

Key Characteristics of ADn-237

• Specificity: It is known for its high precision in [application].
• Versatility: It finds application across [list relevant fields, industries, or scenarios].
• Reliability: It consistently delivers results, making it a staple for [examples of consistent use].

Its utility in diverse spheres has made it an area of interest for professionals and experts alike.

Application Areas

ADn-237 is utilized in a variety of domains, including but not limited to:

1. Industry X – Supporting [specific function] to improve [specific outcome].
2. Research or Development – Used in [scientific studies, experiments, prototypes] to [explain purpose or role].
3. Everyday Utilities – Beneficial in [consumer-friendly applications].

The adaptability of ADn-237 makes it an indispensable tool in these fields.

Benefits of ADn-237

The reasons ADn-237 stands out are numerous. Below are some of the most critical advantages it provides to different sectors.

Precision and Accuracy

ADn-237 ensures optimal performance by delivering precise results, particularly in scenarios where accuracy is non-negotiable.

Enhanced Efficiency

Its implementation or use significantly reduces time, effort, and cost in [specific tasks].

Adaptability

One of the standout features of ADn-237 is its ability to adapt seamlessly to varying requirements, offering flexibility while maintaining performance standards.

Reliability Under Diverse Conditions

It has been tested across a range of conditions, consistently meeting or exceeding expectations. This reliability makes it highly trusted across industries.

How ADn-237 Works

Functions on the principles of [specific principles, such as chemical interaction, coding protocols, or technological innovations]. Here’s a breakdown of how it operates within its primary fields of application.

Operational Workflow

1. Step 1 – Illustrate the initial stage of how it functions or is deployed in its environment.
2. Step 2 – Describe the intermediate stage, showcasing processes or transformations involved.
3. Step 3 – Explain the final stage where results are achieved or outputs generated.

This workflow ensures maximum output efficiency and accuracy.

Integration into Processes

It can be integrated into existing systems or frameworks with minimal disruption, often requiring [specific adjustments or configurations].

Real-World Use Cases

To fully understand its functionality and impact, let’s explore some real-world cases has been successfully employed.

Case 1 – Industry-Specific Application

It was deployed in [scenario], leading to [specific measurable outcome or benefit].

Case 2 – Research Breakthroughs

Researchers used in [study area] to achieve [discoveries or results], showcasing its utility and groundbreaking potential.

Case 3 – Everyday Implications

For consumers, it enhances everyday products and solutions that simplify life or boost productivity.

Challenges and Limitations of ADn-237

It offers a myriad of advantages, understanding its limitations is equally crucial to maximize its potential.

Availability

It might be limited to specific regions, industries, or facilities, which could create accessibility hurdles for certain users.

Cost

The costs associated with using or integrating may pose challenges for small organizations or individual users, depending on its application or procurement.

Specialized Knowledge

Efficient use may require specialized knowledge, training, or resources, adding complexity to its deployment.

Measures to Overcome Challenges

Despite the hurdles, solutions such as [specific measures or alternative options] can be adopted to address these challenges effectively.

Why ADn-237 Matters for the Future

Looking ahead, it holds enormous potential to redefine [specific industry or application area]. Experts predict its use will expand significantly due to [emerging trends, technological advancements, or societal needs].

By addressing its limitations and leveraging its capabilities, it could pave the way for innovations in [key fields] and improve quality of life, both directly and indirectly.

Enhance Your Knowledge of ADn-237

To fully leverage the advantages of ADn-237 and stay ahead in [industry/profession], it’s essential to stay up-to-date on its advancements and applications. Resources like training, webinars, and industry reports are excellent avenues for gaining deeper insights.